These adapter brackets allow for the use of Currie's Anti-Rock sway bar kit to be used with our Comp Mount or Ultimate Steering Brace. The brackets drop the bar roughly 1.75" to allow for proper clearance. Depending on your lift, you may need to shorten the length of the heim links to keep the arms from being angled up too high. As a general rule of thumb, you typically want to be under 20 degrees (from horizontal).
The chassis side of the brackets is slotted to allow them to be positioned properly. They are cut from 1/4"" laser grade plate, and CNC formed. They also receive the same primer and hammer tone powder coat as our other products.
Included in the kit: (Anti-rock hardware not included)
2 - Adapter Brackets
4 - Grade 8 flange nuts
2 - 3/8" spacer washers (to take up for the machined step in the aluminum bar mounts)
"Anti-Rock" is a trademark of by Currie Enterprises and is used as such.